Panic Alarm Station User Manual
22
NAT Setting Page
2. Check Enable UPnP, and set Mapping Types as Manual or Auto.
− Set Mapping Types as Auto
The Ports are read-only, and the external ports are set by the router automatically.
− Set Mapping Types as Manual
You can edit the external port on your demand. And then you should enable UPnP function
on the router.
Please do not arbitrarily edit the default port number. If there is a port conflict and you need to edit
the port number, please modify the port number as follows.
HTTP Port
By default, the value of the HTTP port No. is 80.
Server Port
By default, the value of the Server port No. is 8000. If the value is changed, you need to enter
the server port number on the login page when you log in the device by client software.
RTSP Port
Real-time transport protocol port, please make sure that the port you modified is available.
By default, the value of the RTSP port No. is 554.
3. Click Save to save the settings.
To Next Page
Loading...
Need help?
General
