HIKVISION DS-PHA64-W4M - Page 79

Figure 4-46 Fault Check
Detect Network Camera Disconnecon
If the opon is enabled, when the linked network camera is disconnected, an alarm will be
triggered.
Baery Supervision
If the opon is enabled, when baery is disconnected or out of charge, the device will not
upload events.
Wired Network Fault Check
If the
opon is enabled, when the wired network is disconnected or with other faults, the alarm
will be triggered.
Wi-Fi Fault Check
If the opon is enabled, when the Wi-Fi is disconnected or with other faults, the alarm will be
triggered.
Cellular Network Fault Check
If the
opon is enabled, when the cellular data network is disconnected or with other faults, the
alarm will be triggered.
SIM Card Fault Check
If the opon is enabled, the alarm will be triggered for faults of the SIM card.
Telephone Line Cut O Detecon
If the opon is enabled, the alarm will be triggered when telehphone is disconnected.
RS-485 Excepon Detecon
Hybrid Security Control Panel User Manual
71