User Manual of Network Traffic Camera revise
43
selectable.
6) Select the content in different directories. For the Parent Directory, you
can select Device Name, Device No., and Device IP Address. For the
Level 2/3/4 Directory, you can select Camera Name, Camera No.,
Device IP Address, etc.
7) (Optional) Check Upload Plate Close-up to upload the close-up of the
license plate to the FTP server.
4. Configure the Name Rule.
1) Select the Separator.
2) Select the Elements of each name.
Figure 9-10 Name Rule Configuration
5. Configure the OSD Information.
Figure 9-11 OSD Information
6. Click Save to save the settings.
To Next Page
Loading...
