User Manual of Network Traffic Camera revise
53
Saturation describes the colorfulness of the image color, which ranges from
0 to 100.
Sharpness describes the edge contrast of the image, which ranges from 1 to
100.
White Balance is the white rendition function of the camera used to adjust
the color temperature according to the environment.
The white balance can be set to Auto WB1, Auto WB2, Fluorescent Light,
Incandescent Light, Warm Light, and Natural Light.
3. Select WDR mode. On, Time and Brightness are selectable.
Wide Dynamic Range is used when there is a high contrast of the bright area and
the dark area of the scene.
Time: Activate WDR function on schedule. Set the start time and end time.
Brightness: Active WDR function automatically. Set the brightness threshold.
WDR Level: higher level means stronger effect.
4. Select Iris Mode. Auto and Manual are selectable.
When you select manual, you can manually adjust camera iris via the iris buttons
on live view page.
5. Adjust Brightness Enhancement at Night. It ranges from 0 to 100.
6. (Optional) Check Defog. You can enable the defog function when the
environment is foggy and the image is misty. It enhances the subtle details so that
the image appears clearer.
7. (Optional) Check Light Compensation on License Plate. Adjust the sensitivity
to 0 to 100 if you enable the function.
8. (Optional) Check Enable Gamma Correction. And adjust the correction level
from 0 to 100.
Gamma correction refers to contrast adjustment. This function turns on or
adjusts itself according to the change of environment. The higher the correction
level is, the more obvious the contrast effect is.
9. (Optional) Click Capture Test to test the effects after you complete the
adjustment.
To Next Page
Loading...
