User Manual of Network Traffic Camera revise
59
All: capture and recognize pedestrian, non-motor vehicle and motor vehicle.
Motor Vehicle: capture and recognize motor vehicle.
5. Draw LPR area.
1) Click Draw LPR Area.
2) (3 lanes for instance) Adjust the position and length of Lane Line 1, Lane Line
2, Lane Line 3, and Lane Right Border.
Notes:
● When drawing lines, you should avoid the overlap among lanes.
● Invalid areas should not be included in the surveillance area.
Figure 13-2 Draw LPR Area
3) Save the drawing.
6. Set Lane Direction and Linked Lane No. for lanes.
To Next Page
Loading...
