HIKVISION iDS-TCM403-B/0832 - Set Capture Parameters; Set Captured Image Parameters

Trac Light Color
The color of the trac light.
Trac Light Amount
The number of the trac light(s).
Trac Light Layout
The arrangement of the trac light(s).
c. Click Zoom In to zoom in the live view image.
d. Click Add
Trac Light to add the trac light.
e. Drag the four points of the region to adjust the size or drag the whole region
to adjust its
posion according to the actual scene.
f. Click Delete Current Trac Light to delete the area.
g. Click OK.
You can click Detect to test the
trac light.
Network
Mode
Set Linked Red Light Channel and Yellow Light Related Channel No. according to
the actual wiring.
Note
You can go to Live View → Trac Light Status to view the trac light status.
4.
Click Save.
1.6 Set Capture Parameters
1.6.1 Set Captured Image Parameters
Set the parameters of captured images to raise the image quality.
Steps
Note
The funcon varies with dierent models. The actual device prevails.
1.
Go to Conguraon → Capture → Capture Images → Image Parameters .
Network Trac Camera Conguraon Manual
29