HIKVISION iDS-TCM403-B/0832

Adjust overlay
sequence
Click / to adjust the display sequence of the overlay
informaon.
8.
Click Save.
1.6.6 Set Body Picture Mang
Set body picture mang rst if you need to upload body and vehicle pictures to the plaorm.
Steps
Note
The funcon varies with dierent models. The actual device prevails.
1.
Go to Conguraon → Capture → Capture Parameters → Vehicle Feature → Body Picture
Mang .
2.
Check Enable Body Picture Mang.
Figure 1-20 Set Body Picture Mang
3.
Set body picture mang parameters according to the actual needs.
4.
Click Save.
Result
If the device is level 1 armed, the
mang pictures will be uploaded to this device directly. If the
device is level 2 armed, the
mang pictures will be saved to the SD/TF card and uploaded to a
level 2 armed device.
1.6.7 Set
Trac Light
Set Trac Light Enhancement
Adjust the trac light enhancement parameters to restore true colors of the trac lights.
Steps
Note
The funcon varies with dierent models. The actual device prevails.
Network Trac Camera Conguraon Manual
38