HIKVISION iDS-TCM403-B/0832 - 6.5 Set IEEE 802.1 X

Figure 1-19 Set Composite Picture Overlay
4.
Set the font size, color, overlay posion, etc.
Percentage
It is the percentage that the overlaid informaon occupies on the picture. For example, if you
set the percentage to 50, the overlaid
informaon in a row will occupy up to half of the image
width, and the excess content will be overlaid from a new line.
Composite Picture Capture Time
The capture me of the selected picture sequence will be overlaid on the composite picture.
5.
Oponal: Check the other channel(s) to copy the same sengs.
6.
Select the overlay informaon from the list.
Note
The overlay informaon varies with dierent models. The actual device prevails.
7.
Set the overlay informaon.
Set Type
You can edit the type.
Set Overlay
Informaon
For some informaon types, you can edit the detailed informaon.
Set Overlay Posion If you check it, the current informaon will be displayed from a new
line.
Set Space Edit the number of space between the current informaon and the
next one from 0 to 255. 0 means there is no space.
Set Line Break
Characters
Edit the number of characters from 0 to 100 between the current
informaon line and the previous informaon line. 0 means no line
break.
Network Trac Camera Conguraon Manual
37