HIKVISION iDS-TCM403-B/0832

Set Trac Light Synchronizaon
If you want to synchronize the shuer with the trac light, enable the trac light synchronizaon.
Steps
Note
The funcon varies with dierent models. The actual device prevails.
1.
Go to Conguraon → Video → Camera Parameter → Power Synchronizaon .
2.
Check Power
Synchronizaon.
Figure 1-23 Set Trac Light Synchronizaon
3.
Set Phase Posion and Signal Frequency according to the actual needs.
4.
Click Save.
1.6.8 Set Vehicle Feature Parameters
Set vehicle feature parameters if you need to detect the vehicle features of the passing vehicle.
Steps
Note
The parameters vary with dierent models. The actual device prevails.
1.
Go to Conguraon → Capture → Capture Parameters → Vehicle Feature → Vehicle Feature .
Figure 1-24 Set Vehicle Feature Parameters
2.
Check the vehicle features that needed to be detected, and set the corresponding parameters.
Non-Motor Vehicle User Wearing Helmet Detecon
Network Trac Camera Conguraon Manual
41