HIKVISION iDS-TCM403-B/0832

Figure 1-22 Sample
5) Oponal: Select Light Shape.
6) Oponal: Set Yellow Light Delay Time.
5.
Set
trac light enhancement parameters according to the actual needs.
Note
Keep default sengs if the device supports smart trac light enhancement mode.
Correcon Level
You can set dierent correcon levels for dierent periods. The higher the value is, the
brighter the
trac image color will be.
Detecon Sensivity
It is recommended to adjust by 5 once. This funcon is valid during dayme. The higher the
value is, the less enhancement excepon is.
Extended Pixel
It is recommended to adjust by 5 once. The higher the value is, the clearer the enhanced area
is.
Halo Suppression Level
It is recommended to adjust by 10 once. This
funcon is valid during night. The higher the
value is, the lighter the halo is.
Exposure Level
The higher the exposure level is, the brighter the image is.
Extended Pixel of Mask
It is recommended to adjust by 1 once. The higher the value is, the less possibility to get
exceponal image edges of the trac lights. However, the trac lights will be easily
enhanced.
6.
Click Save.
Network Trac Camera Conguraon Manual
40