HIKVISION iDS-TCM403-B/0832

1.
Go to Conguraon → Video → Trac Light Enhancement .
2.
Check Trac Light Enhancement.
Figure 1-21 Set Trac Light Enhancement
3.
Select Enhancement Mode.
Note
Select Smart Trac Light Enhancement if the device supports this mode.
4.
Draw trac light areas.
1) Select
Magnicaon.
2) Click Zoom In.
3) Click Add
Trac Light.
4) Adjust the drawn areas according to the actual scene.
Note
You need to cover the whole scene where the trac lights locate if you select Smart Trac
Light Enhancement. Draw areas according to each trac light locaon if you select Trac
Light Enhancement.
Network Trac Camera Conguraon Manual
39