HIKVISION iDS-TCV300-A6I

Network Traffic Camera • User Manual
23
Figure 6-4 TCP/IP Settings
Step 2 Configure the basic network settings, including the NIC Type, IPv4 or IPv6 Address, IPv4 or IPv6
Subnet Mask, IPv4 or IPv6 Default Gateway, IPv6 mode, Mac Address, MTU settings and
Multicast Address.
 ANPR IP Address: ANPR listening IP address. Picture can be transferred from camera to server
by setting ANPR IP address and ANPR port in ANPR protocol.
 ANPR Port: ANPR listening port. Picture can be transferred from camera to server by setting
ANPR IP address and ANPR port in ANPR protocol.
 Listening Host IP Address: Picture can be transferred from camera to server by setting listening
host IP address and listening host port.
 Listening Host Port: Picture can be transferred from camera to server by setting listening host
IP address and listening host port.

ANPR listening will be prior listening when ANPR listening and listening are both set.

If you want to set Listening as prior listening, check Picture Uploading Listening, and set
ANPR listening and listening.
Step 3 Configure the DNS server. Enter the preferred DNS server.
Step 4 DNS (Domain Name System) is a network system used to translate names into IP address.
Step 5 Click Save to save the above settings.