HIKVISION iDS-TCV300-A6I User Manual

Network Traffic Camera • User Manual
24

The valid value range of MTU is 1280 to 1500.

The Multicast sends a stream to the multicast group address and allows multiple clients to
acquire the stream at the same time by requesting a copy from the multicast group address.
Before utilizing this function, you have to enable the Multicast function of your router.

A reboot is required for the settings to take effect.
6.5 Configure Port
Purpose:
Configure the HTTP port, RTSP port, SDK port information to connect corresponding client.
Step 1 Go to Configuration > Device Configuration > System Configuration > Port.
Figure 6-5 Port Configuration
Step 2 Configure the following parameters.
 HTTP Port: The default port number is 80, and it can be changed to any port No. ranges from 1
to 65536 which is not occupied, except 21 (FTP port) and 23 (Telnet port).
 RTSP Port: The default port number is 554 and it can be changed to any port No. ranges from 1
to 65536 which is not occupied, except 21 (FTP port) and 23 (Telnet port).
 SDK Port: The default server port number is 8000, and it can be changed to any port No.
ranges from 2000 to 65535 which is not occupied.
Step 3 Click Save to save the settings.
6.6 Configure HTTPS
Purpose:
HTTPS provides authentication of the web site and associated web server that one is
communicating with, which protects against Man-in-the-middle attacks. Perform the following
steps to set the port number of https.
Example

HIKVISION iDS-TCV300-A6I Specifications

General

Brand	HIKVISION
Model	iDS-TCV300-A6I
Category	Security Camera
Language	English