HIKVISION iDS-TCV300-A6I

Network Traffic Camera • User Manual
39
Chapter 8 Text Overlay Configuration
Purpose:
Configure the OSD on the captured pictures and videos.
8.1 Configure Capture Picture Overlay
Purpose:
You can configure the overlay information of the captured picture.
Steps:
Step 1 Go to Configuration > Device Configuration > Text Overlay > Capture Picture Overlay.
Figure 8-1 Single Picture Overlay
Step 2 Check Capture Picture Overlay.
Step 3 Configure the parameters below.
 Percentage: the percentage of the information overlaid on the picture.
 Font Size: the font size of the overlay information.
 Foreground Color: the foreground color of the overlay information.
 Background Color: the background color of the overlay information.
Step 4 Set the overlay text position.