HIKVISION iDS-TCV300-A6I

Network Traffic Camera • User Manual
53
Chapter 10 Image Parameters Configuration
Purpose:
Configure double shutter parameters, general parameters, video parameters, and ICR on this page.
10.1 Configure Dual-Shutter Parameters
Step 1 Go to Configuration > Device Configuration > Image Parameters > Double Shutter Parameter.
Figure 10-1 Dual-Shutter Parameters Configuration
Step 2 Check Enable Dual-Shutter, to guarantee preview quality and algorithm analysis.
Step 3 Select Encoding Type. Video Stream and Recording Stream are selectable.
 Video Stream: Video Stream is transferred for video previewing.
 Recording Stream: Recording Stream is transferred for video recording.
If you select recording stream, set record parameters. Go to Configuration > Device
Configuration > Image Parameters > Record, set Brightness, Contrast, Shutter Speed and Gain.
Step 4 Click Save to save the settings.