HIKVISION iDS-TCV300-A6I

Network Traffic Camera • User Manual
33
7.4 Configure Record Schedule
Purpose:
You can follow the instructions to configure the scheduled recording. By default, the record files of
scheduled recording are stored in the TF card.
Steps:
Step 1 Go to Configuration > Device Configuration > Encoding and Storage > Record Schedule.
Figure 7-4 Record Schedule Configuration
Step 2 Select Record Stream.
Step 3 (Optional) Check Enable Recording Overwriting.
 If you enable the function, when the storage space is full, the former record files will be
overwritten.
 If you disable the function, when the storage space is full, the notice that the space is full will
be reminded.
Step 4 Check Enable Record Schedule.
Step 5 Click Edit to edit the record schedule.