Why won't my Hilti SF 2H-A turn on?
Your Hilti Drill might not be running due to a couple of reasons. First, the battery may not be fully inserted. Ensure it's pushed in until you hear an audible click. Alternatively, the battery might be low, so try charging it.
How to unlock the switch on a Hilti Power Screwdriver?
If the control switch on your Hilti Power Screwdriver is locked, it's likely because the forward/reverse selector switch is in the middle position. To unlock it, push the forward/reverse switch to the left or right.
Why does the battery on my Hilti Power Screwdriver drain so fast?
If the battery on your Hilti Power Screwdriver runs down more quickly than usual, it could be due to a very low ambient temperature. Allow the battery to warm up slowly to room temperature.
Read this manual before initial operation for safe and trouble-free handling.
Explains warning signals and symbols used in the document and illustrations for hazard identification.
Lists and explains symbols found directly on the product for operational guidance.
Provides product type designation and space to record the serial number for service.
Covers work area, electrical, personal, and general power tool safety guidelines.
Specific safety instructions for drilling, drill/driver operations, and handling accessories.
Includes personal safety, dust hazards, and general precautions for safe operation.
Illustrates and labels all parts of the product for easy identification.
Specifies the product's intended applications and limitations.
Explains how to interpret the battery charge level indicators.
Details the tool's electronic system for preventing overload and overheating.
Presents key technical specifications including voltage, weight, speed, and torque.
Details battery operating, storage, and charging temperature ranges.
Provides measured noise and vibration emission levels according to EN 60745.
Step-by-step instructions for safely inserting the battery pack.
Instructions on how to attach the optional belt hook to the tool.
Guides on selecting operating modes, adjusting torque, and changing gears.
Instructions for setting forward/reverse rotation, switching the tool on and off.
Detailed steps for installing and uninstalling accessory tools like drill bits.
Specific procedures for performing screwdriving, drilling, and hammer drilling operations.
Procedures for cleaning and maintaining the tool and its Li-ion batteries.
Guidelines for checking parts for damage and ensuring proper function.
Instructions for safely transporting the tool and batteries.
Recommendations for storing the tool and batteries in a safe environment.
Provides solutions for common problems encountered with the power tool.
Instructions for environmentally responsible disposal of the tool and batteries.
Information regarding Restriction of Hazardous Substances in the product.
Guidance on contacting representatives for warranty inquiries.
To Next Page
General
