Why Hilti Drill doesn't start?
If your Hilti Drill doesn't start, it could be due to an interruption in the electric supply. Try plugging in another electric tool or appliance to check if the outlet is working. Alternatively, the carbon brushes may be worn out, in which case you should have the drill checked by a trained electrical specialist and replace the carbon brushes if needed.
What to do if Hilti Drill bit makes no progress?
If the Hilti Drill bit makes no progress, it might be because the power tool has been set to reverse rotation. To fix this, set the power tool to forward rotation.
Why Hilti TE 1 doesn’t achieve full power?
If your Hilti rotary hammer isn’t achieving full power, the issue might be the gauge (cross section) of the extension cord conductors being inadequate. Ensure you are using an extension cord with an adequate conductor cross section.
Why Hilti Drill has no hammering action?
If your Hilti Drill has no hammering action, it could be because the power tool is too cold. Bring the tip of the drill bit into contact with the working surface, switch the rotary hammer on and allow it to run. If necessary, repeat the procedure until the hammering mechanism begins to operate.
General| Brand | Hilti |
|---|---|
| Model | TE 1 |
| Category | Rotary Hammer |
| Language | English |
To Next Page
