Hilti TE 6-A22 - Work area safety; Electrical safety; Personal safety; Power tool use and care

English 9
5.5 Fitting and adjusting the depth gauge
▶ Fit the depth gauge, if necessary, and adjust it correctly.
5.6 Fitting / removing the chuck
CAUTION
Risk of injury! The depth gauge, if fitted but not used, might hinder the operator.
▶ Remove the depth gauge from the tool.
▶ Fit / remove the chuck.
Printed: 03.02.2017 | Doc-Nr: PUB / 5329716 / 000 / 00