English 11
5.10 Chisel positioning
▶
Set the function selector switch to the position.
6 Types of work
Warning! Risk of damage!
▶ Operation of the direction of rotation and/or function selector switch while the tool is running may
result in damage to the tool.
▶ Do not operate this switch while the tool is running.
Observe the safety instructions and warnings in this documentation and on the product.
6.1 Function selector switch
▶ Set the function selector switch to the desired working position.
◁ Do not operate the function selector switch while the motor is running. Risk of damage!
Printed: 03.02.2017 | Doc-Nr: PUB / 5329716 / 000 / 00
To Next Page
Loading...
