11
en
General information
In these operating instructions, this symbol indi-
cates points of particular importance to safety. The
instructions at these points must always be observed
in order to avoid the risk of serious injury.
Caution: high voltage
The numbers refer to the illustrations. The illustra-
tions can be found on the fold-out cover pages. Keep
these pages open while you read the operating instruc-
tions.
In these operating instructions, the power tool to which
these operating instructions apply is referred to as “the
tool”.
It is essential that the operating
instructions are read before the
tool is operated for the first time.
Always keep these operating
instructions together with the tool.
Ensure that the operating
instructions are with the tool when
it is given to other persons.
Operating controls
Chuck release ring (TE 2-M)
Function selector switch
Control switch
Forwards / reverse switch (TE 2 / TE 2-S / TE 2-M)
Lockbutton
Component parts
Dust shield
Chuck
Side handle
Type plate
Description
The TE 2 / TE 2-E / TE 2-S / TE 2-M is an electrically pow-
ered rotary hammer with pneumatic hammering mech-
anism designed for professional use.
The following items are supplied: power tool, (quick-
release chuck TE 2-M), operating instructions, grease
(except TE 2-E), toolbox.
The following conditions must always be observed
when the tool is in use:
– The tool must be connected to an alternating current
electric supply in compliance with the information
given on the type plate.
– The tool is for hand-held use only.
– The tool must not be used in places where the sur-
rounding conditions may present a risk of explosion.
– Changes or modifications to the tool are not per-
missible.
– To avoid the risk of injury, use only the genuine Hilti
accessories and additional equipment specified for
use with this tool.
– Observe the information printed in the operating
instructions concerning operation, care and main-
tenance. The tool and its ancillary equipment may
present hazards when used incorrectly by untrained
personnel or when used not as directed.
TE 2/TE 2-E/TE 2-S/TE 2-M Rotary Hammer
Read the
operating
instructions
before use.
Return waste
material for
recycling
Contents Page
General information 11
Description 11
Technical data 13
Safety rules 14
Before use 15
Operation 16
Drilling 16
Forwards/reverse rotation 17
Insert tools and accessories 17
Care and maintenance 17
Disposal 18
Manufacturer's warranty – tools 18
Troubleshooting 19
Declaration of conformity 19
02_BA_TE2_S_M_P1_en.qxd 31.08.2007 10:39 Uhr Seite 11
To Next Page
Need help?
General
