OPTIONS | PAGE 55
8. OPTIONS (EXPANSIONS)
New functions can be added to the CEM7 control unit using the CAN bus
connection via expansion modules.
8.1 DISPLAY SCREEN (REPETITIVE)
The control units CEA7 and CEM7 allow display screens to be added to the
installation. This device displays the current status of the control unit, and if it is
in automatic mode, can control the functioning of the genset. The display screen
does not allow the master control unit mode to be changed.
Also, the display screen shows the status of the control unit via error and status
LEDs and the programming of operating parameters.
To Next Page
Loading...
