Himoinsa CEM7 - Date and Time; Language Selection

(APPENDIX II) CONTROL UNIT SCREENS | PAGE 80
* LIST OF ERRORS *

1 . MAX. NETWORK VOLTAGE
2 . MIN. NETWORK VOLTAGE

3 . MAX. NETWORK FREQ.
5. SCHEDULE
The scheduling is carried out via the fth option of the maintenance menu.
* * * * * * * MENU * * * * * * *

5 . Schedules

6 . Date / Time

7 . Language
Programming procedure:
The schedules are programmed to be repeated periodically one day a week. To
enter each menu select it with the cursor (+) (-), and conrm (v):
* * * * * SCHEDULES * * * * *

Monday
Tuesday

Wednesday
* * * * * SCHEDULES * * * * *

Thursday

Friday

Saturday
* * * * * SCHEDULES * * * * *

Sunday

3. COUNTERS
* * * * COUNTERS * * * *

Total Hours 0 1 : 0 0 : 0 0

Partial Hours 0 0 : 1 0 : 0 0

Correct starts 1 1 0
* * * * COUNTERS * * * *

Failed Starts 5

Total

Partial
* * * * COUNTERS * * * *

Day

Month

Year
* * * * COUNTERS * * * *

Mant. # 1

Mant. # 2

Rental
-1:50: Time exceeded on engine maintenance.
150:00: Time remaining until engine maintenance.
1:04: Rental time remaining.
Partial counters can be reset by pressing the RESET button for 5 seconds.
4. LIST OF PREVIOUS ERRORS
Once the previous errors menu has been selected we can select any of the
previous errors listed by pressing conrm (V). The control unit will show us the
conditions which the genset was under at the time of the alarm by pressing (+)
(-), it is possible to see the different screens.