Hioki IM3523 - USB Settings and Connection

2.4 USB Settings and Connection
11
Chapter 2 Model IM3570/ IM3536 Connection and Setting
2.4 USB Settings and Connection
Setting USB
To connect the instrument to a computer the first time, a dedicated USB driver must be installed.
Before connecting the instrument to the computer, install the USB driver.
The USB driver can be downloaded from the bundled CD, or our web site.(http://www.hioki.com)
The USB driver is compatible with the Windows Vista (32-bit, 64-bit version), Windows 7 (32-bit, 64-
bit version) , and Windows 8 (32-bit, 64-bit version) operating systems.
Additionally, do not put the computer into the sleep state while the instrument is connected to the
computer.
Procedure
LCR Measurement Screen
1
Interface Settings
You can configure the setting from any of mode, mode (only IM3570).
Press .
2
USB Setting