3.2
USB Settings and Connection
22
3.2 USB Settings and Connection
Setting USB
1
Open the SYSTEM screen.
2
Select USB as the interface.
The display will vary with the installed options.
3
Select the terminator setting.
4
To connect the instrument to a computer the first time, a dedicated USB driver must be installed.
Before connecting the instrument to the computer, install the USB driver.
The USB driver can be downloaded from the bundled CD, or our web site. (http://www.hioki.com)
The USB driver is compatible with the Windows XP (32-bit version), Windows Vista (32-bit, 64-bit
version), and Windows 7 (32-bit, 64-bit version) operating systems.
Additionally, do not put the computer into the sleep state while the instrument is connected to the
computer.
The SYSTEM screen will be dis-
played.
Selected interface
Using the Z3000
Using the Z3001
Using the Z3002
When an option is connected
Select.
1
Select the terminator setting.
2
You will return to the measure-
ment screen.
To Next Page
Loading...
