16
Convenient Functionality
When you want to stop a piece of equipment if it becomes too hot
You want to monitor the temperature of a piece of equipment and halt its operation if it
becomes too hot.
Alarm output function
See “4 Alarm (Alarm Output)” in the Instruction Manual.
This function lets you set a threshold and then output an alarm signal if the input signal
reaches or exceeds that threshold.
Alarm output can be used to communicate the alarm to a piece of equipment or to control a
warning lamp.
Alarm
Alarm
Alarm
Level
Time
Slope
When the rate of
change of the input
signal continues to
exceed the specied
rate of change per
time during the period
of the set recording
time, an alarm will
output.
When you want to control the LR8450 from a computer
An LR8450 is located in a lab. You want to control it from a computer that is outside
the lab.
Logger Utility
See “9.1 Using the Logger Utility” in the Instruction Manual.
You can use the included Logger Utility application.
You can control an LR8450 from a computer that is connected via a LAN or USB.
LAN/USB
Logger Utility screen
To Next Page
Loading...
Need help?
General
