Hioki MEMORY HiLOGGER LR8450 Quick Start Manual

Basic Operation
77
Conguration Process
Before starting measurement, you must set measurement conditions such as recording interval and
range.
Settings are retained even when the instrument is turned o󰀨.
You can save congured measurement conditions to media (an SD Memory Card or USB Drive).
You can perform measurement using the same settings as in the past by loading previously saved
measurement conditions.
See “3 Saving and Loading Data” in the Instruction Manual.
1
Set the recording conditions.
Press the SET key to display the [Measure] settings screen.
Set the recording interval, recording time, and other parameters.
See “1.3 Setting Measurement Conditions” in the Instruction Manual.
2
Congure the input channels.
Press the SET key to display the [Channel] settings screen.
Set the input type, such as voltage and temperature, and the range.
See “1.4 Conguring Input Channels” in the Instruction Manual.
Settings and Operation
HIOKI LR8450A963-02

Hioki MEMORY HiLOGGER LR8450 Specifications

General

Brand	Hioki
Model	MEMORY HiLOGGER LR8450
Category	Data Loggers
Language	English