3
About the Notations Used in This Manual
Notations related to standards compliance
Indicates compliance with the Waste Electrical and Electronic Equipment (WEEE)
Directive in EU member nations.
Li-ion
Indicates that the instrument is targeted for recycling under the Act on the Promotion of
Eective Utilization of Resources.
Indicates that the instrument complies with standards imposed by EU directives.
Other notations
Indicates useful advice concerning instrument performance and operation.
*
Instructs the reader to see below for additional information.
Indicates the default setting. When initialized, the instrument will revert to this value.
(p. ) Indicates the page number to reference.
Bold The names of control keys are printed in bold.
[ ]
The names of user interface elements on the screen are enclosed in brackets ([ ]).
Windows
Unless otherwise noted, the term “Windows” is used generically to refer to Windows 7,
Windows 8, and Windows 10.
S/s
For this instrument, the number of times the analog input signal is digitized is indicated
in samples per second (S/s).
Example: 20 Ms/s (20 megasamples per second) signies 20×10
6
samples per second.
Accuracy
Hioki denes tolerances for measured values in terms of f.s. (full scale), as indicated below.
f.s.
Maximum display value, scale magnitude
Indicates the maximum display value or scale magnitude. Generally speaking, the f.s.
gure indicates the range in current use.
Example: f.s. for the 1 V range = 1 V
To Next Page
Loading...
Need help?
General
