DIGI*TRAC Annunciator User’s Guide
12
Single Credential Assignment
To assign Annunciator privileges for a single credential through
Enrollment Manager:
1. Open the Enrollment Manager.
2. Select the person to whom Annunciator privileges should be
assigned.
3. Create a new credential by double clicking the Add New
Credential button. The Credential Properties dialog box for the
selected person appears.
4. Fill out this form as required making sure to supply a new code or
card.
5. Click the Function tab.
6. If not already selected, click the Single Function radio button.
7. In th e “Function Category” field, select Alarm from the pull-down
option list.
8. From the “Function” field, select Alarm Cancel from the pull-down
option list.
9. From the “Controller” combo box, select the currently-defined
controller to which this extension code applies.
10. From the “Control Zone” combo box, select the currently-defined
control zone or master control zone during which this extension
digit applies.
11. Click Add to register the new extension digit in the lower window.
12. Click OK to return to the Enrollment Manager main menu. The
new credential appears in the Credential pane for the selected
user.
13. Click OK to return to the main menu.
To Next Page
Loading...
Need help?
General
