16
Installation BAT867-R
Release
06
08/2018
1 Description
1.1 General description
The devices allow you to set up WLANs (Wireless Local Area Networks) in a
local network. In contrast to a conventional network connection through
copper cables and fiber optic cables, some of the communication is
performed by means of a radio link.
The devices allow you to install a new LAN or expand an existing LAN.
Thanks to their high level of flexibility, the BAT867-R device is suitable for a
wide range of applications. Anywhere that high bandwidths, stable operation
and network security is required, WLAN with these devices provides the ideal
solution.
The devices are dual-band industrial high-performance wireless LAN access
points or clients complying with IEEE 802.11a/b/g/n/ac. They provide a high
radio output with a bandwidth of up to 867 Mbit/s. The devices support MIMO
(Multiple Input Multiple Output) and Multipath. The bandwidth is increased by
using the multipath transmission by means of reflections. 2 antennas for
sending and receiving help ensure stable network coverage with few shadow
areas.
The BAT867-R devices are designed for the special requirements of
industrial automation. They meet the relevant industry standards, provide
very high operational reliability, even under extreme conditions, and also
long-term reliability and flexibility.
The devices work without a fan.
The following installation options are available:
Mounting on the DIN rail
There are convenient options for managing the device. Manage your devices
via:
Web browser
SSH
Telnet
HiDiscovery (software for putting the device into operation)
Management software (for example Industrial HiVision, LANconfig/
LANmonitor)
To Next Page
Loading...
