20
Installation BAT867-R
Release
06
08/2018
1.6 Connections for antennas
You require antennas for operating the devices.
The devices have 2 Reverse SMA connectors for connecting external
antennas.
The "Antenna Guide" document provides an overview of the antennas that
can be used as well as the suitable antenna accessories.
This document is available for download as a PDF file on the Hirschmann
product pages (www.hirschmann.com).
1.7 Display elements
After the supply voltage is set up, the software starts and initializes itself.
Afterwards, the device performs a self-test. During this process, various
LEDs light up.
1.7.1 Device state
These LEDs provide information about conditions which affect the operation
of the whole device.
P
Color
Activity Meaning
green lights up LED lights up after the configuration
red flashing Device has detected at least one hardware error.
green/red Short flashing No password or the default password is set
LS/DA
Color
Activity Meaning
— off No network device connected
green lights up Ethernet connection active
yellow flashing Data traffic
WLAN
Color
Activity Meaning
—off No WLAN network specified
WLAN module deactivated
WLAN module does not send any beacons
green lights up
At least one WLAN network defined
WLAN module activated
To Next Page
Loading...
