Hirschmann BAT867-R - Checking the Package Contents; Installing and Grounding the Device; Installing the Device Onto the DIN Rail

22
Installation BAT867-R
Release 06 08/2018
2 Installation
The devices have been developed for practical application in a harsh
industrial environment.
On delivery, the device is ready for operation.
Perform the following steps to install and configure the device:
 Checking the package contents
 Installing and grounding the device
 Installing the antennas
 Connecting the terminal blocks
 Operating the device
 Connecting data cables
 Making basic settings
 Configuring the transmit power
2.1 Checking the package contents
 Check whether the package includes all items named in the section
“Scope of delivery” on page 44.
 Check the individual parts for transport damage.
2.2 Installing and grounding the device
2.2.1 Installing the device onto the DIN rail
Verify that the device maintains the minimum clearing in order to meet the
climatic conditions:
 Top and bottom sides of device: 1.97 in (5 cm)
 Left and right device side: 0.79 in (2 cm)