Hirschmann GRS103-22TX/4C-2HV-2A User Manual

48
Installation GRS103
Release 01 03/2022
Figure 23: Mounting in a switch cabinet: Mounting brackets with oblong holes
Note: When operating the device in an environment with continuous
vibration loads, it is necessary to additionally fasten the device to the switch
cabinet using 2 mounting brackets on the front or rear side of the device.
You obtain the additional brackets as accessories.
See “Accessories” on page 77.

Hirschmann GRS103-22TX/4C-2HV-2A Specifications

General

Brand	Hirschmann
Model	GRS103-22TX/4C-2HV-2A
Category	Switch
Language	English