Hisense A6H - Screen Aspect Ratio and Overscan

Settings Overview
Note:
• Some functions above may not be applicable in some models/countries/regions.
Related information
Picture Issues on page 46
Configure Calibration Settings
Press button on your remote control to select Settings > Display and sound > Picture > Calibration
settings
Adjust the colour space and Gamma to best suit the content you’re viewing.
• Colour Tuner
Adjust the Colour, Hue, Saturation and Brightness of colour settings.
• White Balance
Adjust the intensity of red, green and blue lights to view the true colours of all images in the picture.
• Gamma
Adjust the Gamma to alter how the TV will respond to the grayscale content. In a dark room choose a
Higher number like 2.2. In a brighter area select a Lower number like 2.0. In general, 2.4 is normally
recommended.
• Gamma Calibration
Adjust selected Gamma curve.
• RGB Only
View images based on default settings or choose the colour red, blue or green.
Note:
• Some functions above may not be applicable in some models/countries/regions.
Related information
Picture Issues on page 46
Reset the picture settings
Press button on your remote control to select Settings > Display and sound > Picture > Reset
Reset current picture settings back to the factory setting.
Screen
Adjust screen related settings.
Change the Aspect Ratio
Press button on your remote control to select Settings > Display and sound > Screen > Aspect Ratio
You can adjust the Aspect Ratio to stretch or zoom in on your picture. You can choose from the following
settings: Automatic, 16:9, 4:3, Panoramic, Movie Zoom, Direct, 21:9 or 32:9.
Note:
• Using the special functions to change the size of the displayed image (e.g. changing the height/width ratio)
for the purpose of public display or commercial gain may infringe on copyright laws.
25