Hisense A6H - Audio Output

Settings Overview
Configure Advanced Settings
Press button on your remote control to select Settings > Display and sound > Sound > Advanced
Settings
Tune the audio settings and quality of the TV.
• Balance
Adjust the left and right speaker strength to optimize audio for a specific location.
• Volume Level
Balance the sound volume of each source.
• Auto Volume Control
Activate to prevent the volume from changing when you switch TV channels.
• Lip Sync
Synchronize the displayed image with the audio output.
• Equalizer
Boost the volume at different frequencies.
Related information
Connecting Bluetooth Devices on page 18
Connecting Headphones on page 20
Connecting Speakers or Other Audio Receivers on page 20
Connecting a Digital Audio System with ARC/eARC on page 21
Reset the sound settings
Press button on your remote control to select Settings > Display and sound > Sound > Reset
Reset current audio settings to factory mode.
Audio Output
Adjust the audio output settings.
Select Speakers
Press button on your remote control to select Settings > Display and sound > Audio Output, choose
Audio Output and select the speakers which you want to use.
Configuring WiSA Speaker Settings
Press button on your remote control to select Settings > Display and sound > Audio Output > WiSA
Speaker Settings.
Wireless audio transmission can be available with Dongle provided by WiSA Ready and sound system
certified by WiSA Ready.
Note:
• WiSA Speaker Settings may not be applicable in some models/countries/regions.
Related information
Connecting Speakers or Other Audio Receivers on page 20
28