11
Select a heat setting by touching the “-” or “+” control.
• If you don’t choose a heat setting within 1 minute, the
ceramic hob will automatically switch off. You will need to start
again at step 1.
• You can modify the heat setting at any time during
cooking.
• By holding down either of these buttons, the value will
adjust up or down.
3.3.2 Finish cooking
Turn the cooking zone off by scrolling down to
“0” or touching “-” and “+” control
together.
Turn the whole cooktop off by touching the
ON/OFF control
Beware of hot surfaces
“H” will show which cooking zone is hot to touch. It will disappear when the surface has cooled down
to a safe temperature. It can also be used as an energy saving function if you want to heat further pans,
use the hotplate that is still hot.
3.3.3 Using the Treble zone function
• The function only work in 3# cooking zone
• The treble cooking zone has two cooking areas that you can use a central section and an outer section.
You can use the central section (A) independently or both sections (B) or (C) at once.
Activate the Treble zone
Adjust the heating setting between power levels 1 and 9
(e.g. 6)
To Next Page
Loading...
Need help?
General
