What to do if Hisense HBF22ILPP Oven displays an error code (E1, E2, E3 etc.)?
If your Hisense Oven is displaying an error code such as E1, E2, or E3, this indicates an error in the electronic module operation. Try disconnecting the oven from the power mains for a few minutes, then reconnect it and set the time. If the error persists, it may require a service technician.
What to do if there is no response of the sensors and the display is frozen on Hisense Oven?
If the sensors of your Hisense Oven are unresponsive and the display is frozen, disconnect the appliance from the power mains for a few minutes by either undoing the fuse or switching off the main switch. After a few minutes, reconnect the appliance and switch it back on.
Why is my pastry underdone in Hisense Oven?
If your pastry is underdone in the Hisense Oven, ensure that you have selected the correct temperature and heating system for your recipe. Also, verify that the oven door is completely closed during operation.
Why does the main fuse in my home trip often when using Hisense HBF22ILPP?
If the main fuse in your home trips often when you are using your Hisense Oven, you should call a service technician.
To Next Page
General