51
TROUBLESHOOTING TABLE
If the problems persist despite observing the advice above, call
an authorised service technician. Repair or any warranty claim
resulting from incorrect connection or use of the appliance shall
not be covered by the warranty. In this case, the user will cover the
cost of repair.
Problem/error Cause
There is no response of
the sensors; the display is
frozen.
Disconnect the appliance from the power mains for a few
minutes (undo the fuse or switch off the main switch);
then, reconnect the appliance and switch it on.
The main fuse in your home
trips often.
Call a service technician.
The oven lighting does not
work.
The process of changing the light bulb is described in the
chapter Cleaning and Maintenance.
The pastry is underdone. Did you choose the right temperature and heating
system?
Is the oven door closed?
An error code is displayed
(E1, E2, E3 etc.).
• There is an error in the electronic module operation.
Disconnect the appliance from the power mains for a
few minutes. Then, reconnect it and set the time of day.
• If the error is still indicated, call a service technician.
784868
Before the repair, disconnect the appliance from the power mains
(by removing the fuse or by removing the plug from the wall
outlet).
To Next Page
Loading...
Need help?
General