44
784868
INSTALLING THE CATALYTIC INSERTS
Only use conventional cleaners to clean the guides.
Remove the wire guides or extendable
guides.
1
Mount the guides onto the catalytic
insert.
2
Hang the inserts with guides attached
using the holes provided, and pull
upwards.
When installing fully extendable guides
with catalytic inserts, insert one end of the
supplied snap locks into the openings at the
bottom of the oven cavity wall and insert
the other end of the snap locks into the
guides.
The purpose of the snap locks is to hold the
guides in place more firmly.
Do not wash the catalytic inserts in the dishwasher.
To Next Page
Loading...
