95
Presentation tools
USB Display(Windows computer)
The projector can display images transferred from a computer via an USB cable (11).
Select the USB DISPLAY for the USB TYPE B item in the OPTION menu.
When you connect your computer to the USB TYPE B port on the projector 
using a USB cable, the projector will be recognized as a CD-ROM drive on your 
computer. Then, the software in the projector, “LiveViewerLiteForUSB.exe”, will 
run automatically and the application, “LiveViewer Lite for USB”, will be ready on 
your computer for the USB Display. The application, “LiveViewer Lite for USB”, will 
close automatically when the USB cable is unplugged. However, it may remain 
displayed at times.
• If the software does not start automatically (this is typically because 
CD-ROM autorun is disabled on your OS), follow the instructions below.
(1) Click on the [Start] button on the toolbar and select the “Run”
(2) Enter F:\LiveViewerLiteForUSB.exe and then press the [OK]
• CD-ROM autorun is disabled while the screen saver is running.
• The image transmission from the computer is suspended while the password-
protected screen saver is running. To resume the transmission, exit the screen 
saver.
• 
If "Waiting for connection." remains displayed while the USB cable is connected, 
remove the USB cable and reconnect after a while.
• Check our web site for the latest version of the software and its manual.
(
User's Manual (concise))
Follow the instructions that can be obtained at the site for updating.
NOTE
If your CD-ROM drive is not drive F on your computer, you will 
need to replace F with the correct drive letter assigned to your 
CD-ROM drive.
Hardware and software requirement for computer
• OS: One of the following. (32 bit version only)
 Windows 
®
 XP Home Edition /Professional Edition
 Windows Vista 
®
 Home Basic /Home Premium /Business /Ultimate /Enterprise
 Windows
®
 7 Starter /Home Basic /Home Premium /Professional / Ultimate /
Enterprise 
• CPU: Pentium 4 (2.8 GHz or higher)   
• Graphic card: 16 bit, XGA or higher
• Memory: 512 MB or higher
• Hard disk space: 30 MB or higher
• USB Port
• USB cable : 1 piece
Starting USB Display
(continued on next page)