EasyManuals Logo

Hitachi CP-D27WN User Manual

Hitachi CP-D27WN
256 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #239 background imageLoading...
Page #239 background image
9
ENGLISH
WARNING Always handle the batteries with care and use them only as
directed. Improper use may result in battery explosion, cracking or leakage,
which could result in re, injury and/or pollution of the surrounding environment.
• Be sure to use only the batteries speci ed. Do not use batteries of different
types at the same time. Do not mix a new battery with used one.
Make sure the plus and minus terminals are correctly aligned when loading a battery.
• Keep a battery away from children and pets.
• Do not recharge, short circuit, solder or disassemble a battery.
Do not place a battery in a re or water. Keep batteries in a dark, cool and dry place.
If you observe battery leakage, wipe out the leakage and then replace a battery.
If the leakage adheres to your body or clothes, rinse well with water immediately.
Obey the local laws on disposing the battery.
• Try changing the batteries when the remote
control malfunctions.
• This remote control works with the remote
sensors on the projector using infrared light
(Class 1 LED). The active sensor senses
the remote control signal assigned within 60
degrees to right and left, and within 3 meters.
For details, see User's Manual - Operating
Guide.
• Prevent the remote sensors from being hit by
a strong ray. It may cause malfunction of the
projector and remote control.
NOTE
21
3
Remote sensor
3m
(approx.)
30°
30°
Preparing for the remote control
Please insert the batteries into the remote control before using it. If the remote
control starts to malfunction, try to replace the batteries. If you will not use the
remote control for long period, remove the batteries from the remote control and
store them in a safe place.
1.
Holding the hook part of the battery
cover, remove it.
2.
Align and insert the two AA batteries
(HITACHI MAXELL ENERGY, Part No.LR6
or R6P
) according to their plus and
minus terminals as indicated in the
remote control.
3.
Replace the battery cover in the
direction of the arrow and snap it back
into place.

Table of Contents

Other manuals for Hitachi CP-D27WN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hitachi CP-D27WN and is the answer not in the manual?

Hitachi CP-D27WN Specifications

General IconGeneral
BrandHitachi
ModelCP-D27WN
CategoryProjector
LanguageEnglish

Related product manuals