Hitachi CP-D27WN User Manual

10
Turning on the power
1
.
Make sure that the power cord is rmly
and correctly connected to the projector
and the outlet.
2
.
Make sure that the POWER indicator is
steady orange. Then, remove the lens
cover.
3
.
Press the STANDBY/ON button on the
projector or the remote control.
The projection lamp will light up
and the POWER indicator will begin
blinking in green. When the power is
completely on, the indicator will stop
blinking and light in steady green.
WARNING ►A strong light is emitted when the projector’s power is on. Do
not look into the lens of the projector or look inside of the projector through any
of the projector’s openings.
NOTE • Please power on the projector prior to the connected devices.
• The projector has the DIRECT POWER ON function, which can make the projector
automatically turn on. For details, please see User's Manual - Operating Guide.
STANDBY/ON button
VIDEO
DOC.CAM
ERA
KEYSTONE
ASPECT
SEARCH
BLA
NK
MUTE
MY BUTTON
POSITION
ESC
MENU
RESE
T
COMPUTER
MY SOURC
E/
AUTO
MAGNIFY
PAGE
DOWN
ON
OFF
FREEZE
UP
࣮
㸩
VOLU
ME
1
2
ENTER
POWER indicator

Hitachi CP-D27WN Specifications

General

Brand	Hitachi
Model	CP-D27WN
Category	Projector
Language	English