Hitachi CP-WU8450 User Manual

106
Presentation tools
Projector 6.
Operation
(continued)
Temporarily blanks out the display.
Another touching or clicking recovers the display.
Toggles between display/hide the Pattern (grid lines).
Cycles through the display source signals.
It can be used in the same way as the • INPUT button on the
control panel. However, images cannot be selected from the
LAN port or the USB TYPE B port.
Turns off the projector.
Touch/click the icon for three seconds or so.
If you turn the projector off while using the drawing function, •
any unsaved drawings will be lost.
Mouse 7.
Operation
When the computer screen is displayed, this function operates the
computer like a simple mouse or keyboard.
In order to use this function, connect the • USB TYPE B port of the
projector with a USB (A) port of the computer via a USB cable.
Then select MOUSE for USB TYPE B item in the OPTION menu
(
65).
Works like the Page Down button on a keyboard.
Works like the Page Up button on a keyboard.
Works like the left-click button on a mouse.
Works like the right-click button on a mouse.
Moves the mouse’s cursor in the direction of the arrow.
Exit8.
Closes the tool bar and exits the drawing function.
When exiting the drawing mode, all unsaved drawings are lost.•
Minimize9.
Minimizes the tool bar.
Touching or clicking the minimized tool bar icon displays the tool bar
again.
Drawing function (continued)

Hitachi CP-WU8450 Specifications

General

Matrix size	0.76 \
Matrix type	3-panel (p-Si TFT active)
Native aspect ratio	16:10
Projection distance	1 - 38.3 m
Projection technology	LCD
Contrast ratio (typical)	3000:1
Screen size compatibility	30 - 600 \
Projector native resolution	WUXGA (1920x1200)
Audio input	3
RS-232 ports	1
Zoom capability	Yes
Focal length range	- mm
Lamp type	UHP
Lamp power	330 W
Lamps quantity	1 lamp(s)
Light source type	Lamp
Service life of light source	- h
3D	-
Supported video modes	1080i, 1080p, 480i, 480p, 576i, 576p, 720p
Analog signal format system	NTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM
Supported graphics resolutions	1024 x 768 (XGA), 1280 x 1024 (SXGA), 1360 x 768 (WXGA), 1400 x 1050 (SXGA+), 1440 x 900 (WXGA+), 1600 x 1200 (UXGA), 640 x 480 (VGA), 800 x 600 (SVGA)
RMS rated power	16 W
Number of built-in speakers	2
DVI port	No
BNC input ports	5
USB connector type	USB Type-A, USB Type-B
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	0
Noise level	- dB
Certification	UL/cUL, FCC Part15 class A, AS/NZS CISPR22 class A, CE, GOST-R
Placement	Desktop, Ceiling
Product type	Standard throw projector
Product color	White
Power source	AC
AC input voltage	100 - 240 V
Power consumption (standby)	- W
Operating temperature (T-T)	0 - 45 °C
Sustainability certificates	RoHS

Weight and Dimensions

Depth	396 mm
Width	498 mm
Height	135 mm
Weight	8700 g