FED System Ports Mode Description
A long wavelength host
connector (-1PL8) for
single mode can be used
instead of the short
wavelength host
connector.
16-port, 8-
Gbps Fibr
e
Channel,
shortwave and
longwave
adapter
Open
16
(8 per
blade)
T
ar
get and
Initiator
1
Contains two 8-port
front-end modules. Each
port contains an LC-type
short wavelength, multi-
mode host connector.
These are installed by
default.
A long wavelength host
connector (-1PL8) for
single mode may be
used instead of the
short wavelength host
connector.
8-port, 16-
Gbps Fibre
Channel,
shortwave and
longwave
adapter
Open 8
(4 per
blade)
Target and
Initiator
1
Contains two 4-port
front-end modules. Each
port contains an LC-type
short wavelength, multi-
mode host connector.
These are installed by
default.
A long wavelength host
connector (-1PL16) for
single mode may be
used instead of the
short wavelength host
connector.
16-port, 8-
Gbps FICON
shortwave
adapter
Mainfra
me
16
(8 per
blade)
Target Contains two 8-port
front-end modules. Each
port contains a short
wavelength (multi-
mode) host connector.
16-port, 8-
Gbps FICON
longwave
adapter
Mainfra
me
16
(8 per
blade)
Target Contains two 8-port
front-end modules. Each
port contains an LC-type
long wavelength (multi-
mode) host connector.
Supported connectors and protocols
Chapter 2: Storage system hardware overview
Hitachi Virtual Storage Platform G1000, G1500, and VSP F1500 Hardware Guide 40
To Next Page
Loading...
