Hitachi IJ RX2-SD160 - 4.13.1 Print count characters (Continued)

4-59 ●Use the count function
Value
Range
Update (in progress)
(unit)
００１
０００
９９９
０００００
００００１
Increment
Jump from:
to:
Reset
Count skip
９９９
００１
００１
01
down
up
Direction
Zero-suppression
Multiplier
・・・・・・・・・・
Enable
Disable
Print description 2015.07.0712:45
Menu
Com=0
[Ready ]
Ink operating time １００(hours)
Cumulative op. time １００(hours)
Print count １０００(prints)
Ink pressure  ０．２５０(MPa；standard value:０．２５０)
Change
message
Select
message
Overwrite
message
Adjustprint
parameters
Operation
management
Message name[ ]
−
＋
Countreset
M
Manual
Shutdown
Inter-
laced
・ ・ ・ ・ ・
Printcount
reset
Reset the count value to a preset value.
4
Reset value "001" is set beforehand.
When Count reset is pressed, the count value is reset to
the preset "001".
Count reset