Hitachi IJ RX2-SD160 - 6.5 Setting password for each user; (1) Functions

6-14 ●Setting password for each user
Password setup 2015.07.0712:45
Com=0
[Stop ]
Old password
New password
New password reentry
OK
Cancel
M
Manual
Startup
HOME
Login management menu 2015.07.0712:45
Back
Com=0
[Stop ]
Login history Select login user Password setup
M
Manual
Startup
HOME
6.5 Setting password for each user
(1) Functions
● User sets their own password.
● However, when the user was defined by the administrator, and the password setting is protected, the password
change screen is not displayed.
● A password must be entered when logging in.
● Make the password 12 characters or less.
Press Login management in the environment setup menu.
The Login management menu is displayed.
1
Press Password setup .
The Password setup screen is displayed.
2
Enter "Old password", "New password", and "New password reentry".
3
Press OK .
4
Displays the
history of
logged in
users.
Select login
user
Sets the password.
However, it is not
displayed when
authorization is not
given from the
administrator.
Input the old password.
Not displayed when the
password is not set.
Input the new password.
OK
(2) Operation
Please change the password periodically.