Hitachi IJ RX2-SD160 - 3.3.3 Basic operation to change the settings (Continued); (2) Operation (Maintenance “Excitation V update” screen is used as an example.)

3-23 ●Basic operation
2
2015.07.0712:45
Com=0
Excitation V-ref.
Ref. ambient temperature
Automatic update
Incremental change
Print trigger source
Print data
Inc.
11
1
20
(1〜9)
Data to be displayed
For test
Sensor
Button input
Excitation V update [Standby ]
(0〜19)
− ＋
(℃)
M
Manual
HOME
Shutdown
2015.07.0712:45
Com=0
Excitation V-ref.
Ref. ambient temperature
Automatic update
Incremental change
Print trigger source
Print data
11
1
20
(1〜9)
Inc.
Data to be displayed
For test
Sensor
Button input
(0〜19)
(℃)
Cancel
Disable
Dec.
Inc.
Excitation V update [Standby ]
(0〜19)
− ＋
(℃)
M
Manual
HOME
Shutdown
“Print trigger source” setting
Press the applicable button.
3
“Automatic update” setting
Display the selection menu window by pressing the button and close from within that window.
Press the Button input .
Press the button.
Selection menu window is displayed.