Hitachi PJ-TX200 - For HDMI Signal Source; For DVI Signal Source; For a SCART RGB Input

14
Y
C
B
/PB
C
R
/P
R
COMPON
E
NT
VID
EO
S-VI
DE
O
VIDEO
COMPUTER
CONTRO
L
HDMI
TRIGGE
R
DVI-HDMI cable
DVI Out
Y
C
B
/P
B
C
R
/P
R
COMPONENT
VIDEO
S-VIDEO
VIDEO
COMPUTER
CONTROL
HDMI
TRIGGER
HDMI cable
HDMI Out
Preparations
For an HDMI signal source
► Turn off all devices prior to connecting them to the projector.
Attempting to connect a live device to the projector may generate extremely loud
noises or other abnormalities that may result in malfunction and/or damage to
the device and/or projector.
► Use the accessory cables or a designated cable type to make connections.
Some cables have to be used with a core. A cable that is too long may cause
picture degradation. Please consult with your dealer for more information. For
cables that have a core only at one end, connect the end with the core to the
projector.
► Make sure that devices are connected to the correct port. An incorrect
connection may result in malfunction and/or damage to the device and/or
projector.
CAUTION
For a DVI signal source
For an SCART RGB input
Y
CB/PB
CR/PR
COMPONENT VIDEO
S-VIDEO
VIDEO
COMPUTER
CONTROL
HDMI
TRIGGER
SCAR
T
Out
SCAR
T
cable
Adapter
Component
cable
Vi
deo
cable