Hitachi PJ-TX200 - S-Aspect, Information

47
ENGLISH
Advanced Menu (INPUT menu)
Item Description
S-ASPECT
Using the ▲/▼ cursor buttons turns the S-ASPECT function on and
off.
TURN ON

TURN OFF
When the S-ASPECT function is enabled S2-video signals can be
detected and an optimum aspect ratio automatically selected.
- NOTE -
• When the ASPECT button on the remote control is used or the
ASPECT item in the IMAGE menu (
43) is used, this item is
automatically disabled.
INFORMATION
This function is performed as soon as the ► cursor button is
pressed to select this item. It displays the INFORMATION dialog
that shows the currently selected signal input.
Example for computer (RGB) signals
Example for an HDMI signal
Example for a video, s-video and component video signal
Example for a SCART RGB signal
- NOTE -
• The INFORMATION function cannot be used when there is no
signal.
COMPUTER
1024x768 @85
INPUT‑INFORMATION
COMPUTER
1024x768 @60
INPUT‑INFORMATION
FRAME LOCK
COMPUTER
1080i @60
INPUT‑INFORMATION
HDMI
INPUT‑INFORMATIO
N
1920x1080i @60
HDMI
1920x1080i @60
INPUT‑INFORMATIO
N
FRAME LOCK
VIDEO
NTSC
INPUT‑INFORMATIO
N
AUTO
S‑VIDEO
PAL
INPUT‑INFORMATION
AUTO
COMPONENT
1080i @60
INPUT‑INFORMATION
COMPONENT
576i @50
INPUT‑INFORMATIO
N
SCART RG
B