Advanced Menu (INPUT menu)
INPUT menu
The following functions are accessible via the INPUT
menu. After selecting an item according to the
procedure described in the preceding "Advanced
Menu operation" section (35), refer to the following
table for details on operating the selected item.
Item Description
PROGRESSIVE
Using the ▲/▼ cursor buttons in the PROGRESSIVE menu
changes the interpolation mode of an interlaced signal.
TV
FILM
TURN OFF
TV
This mode makes the screen image crisper.
FILM
This mode makes the screen image crisper, and this mode can
also be adapted to the 3-2 Pull-Down system.
- NOTE -
• The PROGRESSIVE function can only be used for interlaced
video, s-video, or component video 525i (480i) or 625i (576i) 1125i
(1080i) signals.
• The TV and FILM modes may cause certain picture defects (ex.,
jagged lines). If this occurs, select TURN OFF, although the screen
image may lose its crispness.
COLOR SPACE
Using the ▲/▼ cursor buttons changes the color space mode.
AUTO
RGB
SMPTE240
REC709
REC601
AUTO
Automatically selects an optimum mode.
RGB, SMPTE240, REC709, REC601
The selected color space is used.
- NOTE -
• The COLOR SPACE function can only be used for signals from
the COMPUTER, HDMI or COMPONENT VIDEO ports excluding
component video 525i (480i) or 625i (576i), or SCART RGB signals.
• The AUTO mode may not work well for some signals. In this
situation select a suitable mode other than AUTO.
(Continued on next page)
To Next Page
Loading...
